X-treme Foam Cleaner

Titebond WeatherMaster X-TREME Multi-Purpose Cleaner is designed to clean up WeatherMaster X-TREME foam sealants. This product is an acetone cleaner and is not meant to be used on surfaces that are not solvent or acetone resistant. The Cleaner is a spray solvent used to dissolve uncured foam. X-TREME Cleaner can also be attached to the WeatherMaster X-TREME Dispensing Unit, allowing it to be flushed and kept clean and operable.

APPLICATION TEMPERATURE:

65 to 80°F (18 to 27°C)

DISPENSING UNIT CLEANING OPTION:

While holding the spray activator aside, screw the X-TREME Multi-Purpose Cleaner container into the basket adapter until it will go no further. Do not over-tighten. Carefully pull the Dispensing Unit trigger until solvent extrudes from the gun. Release the Dispensing Unit trigger and let the solvent soak in the Dispensing Unit for one to two minutes. Pull Dispensing Unit trigger and dispense solvent into a suitable container. If necessary, repeat process until only clear solvent appears. Do not store Dispensing Unit with X-TREME Multi-Purpose Cleaner attached. For best results store Dispensing Unit with a fresh can of X-TREME foam sealant or adhesive.

LIMITATIONS:

• Flush Dispensing Unit after every 10 to 20 cans of foam or adhesive
• Wear protective glasses or goggles, nitrile gloves and clothing that protects against dermal exposure.
• Use only in a well ventilated area.
• Do not use in horizontal position.